Thursday, July 30, 2009

Low-Res, Content Rich

I've spent more time at work in the last three days using Microsoft Paint than ProEngineer. There was a communication problem with a supplier about what surface finishes should go where on some of my complicated machined parts. The drawing depicts this information using tiny filled dots on each surface connected to leader lines ending with note callouts. NOTE 2.1 is irridite, NOTE 2.2 is hardcoat anodization, NOTE 2.3 is Aeroglaze over irridite, and so on. One finish (usually Aeroglaze) is the default for the view, and I have notes calling out the other finishes.

I'll be honest, the views look like porcupines. If that was all you had to go on, it would be tough to get a clear picture of what the finished part was supposed to look like, or even if I had any goal in mind. After consulting with the supplier and talking with the people who would have to do all the complicated masking, we decided that color coded pictures would be very helpful. I verified that no-one there was colorblind, then settled on red = irridite, green = anodization, blue = Aeroglaze.

Once back at my desk I started the process to make each picture in ProEngineer. First, to get rid of the gradient background I changed to "Black on White" view preferences. I opened the file, oriented it to show a lot of surfaces at once, zoomed in to fill the screen, switched to "no hidden lines" view, and Saved a Copy as a Tiff (Snapshot). This created an image file that was like a coloring book - all the details of the edges of the part in one solid color, on a white background. Rather than taking all the screenshots of the different part orientations at once, I left ProE set to this one orientation for reference as I colored the picture.

In MS Paint, I opened the .tif file and immediately did a save-as to add _color at the end of the filename. (Just in case I royally mess up, I like having a clean copy to start from.) The screen shot is never perfect, there may be a few pixels missing from the outline here and there due to rendering limitations in ProE. To find these "leaks" I first flood the background in pink. Then with areas to focus on I zoom in and use the eyedropper to sample the color of the outline. The pencil tool in "large" mode can close the gaps - usually it was fairly obvious where the pixel should have been. I scoot around the picture looking for other missing pixels before zooming back out again. Paintbucket to white, turn the pink to white again, and then get down to the real work.

I'll keep the .pdf of the official drawing open in a separate window for reference. (Oh, how I wish we had dual monitors!) These RGB pictures aren't official documentation, so they are overridden by the drawing, so it is important to make sure the two match. If not, our quality department could impound the parts upon receipt if the finishes do not match the released print. Paintbucket is the tool of choice, and I soon have that graphic completed. Then I save, import to PowerPoint, and start on the next one.

Three to four views are enough to describe each piece. One graphic goes on each slide, set to B size (11" x 17") paper so less detail is lost. I include a copy of the color key on each page at the request of the masking department. I finish by printing to .pdf and emailing out, then on to the next part.

I don't think I'd want to do this exercise for every single part I design. But when there are three or more finishes in one piece it is just so much easier to digest like this. Even the shaded 3D model is difficult to read correctly, because two out of three finishes I used here are black.

Bonus: pixels remind me of childhood.

Thursday, July 23, 2009

Fashion News

Lee now makes jeans cut to actually fit against the back of one's waist without a huge gap. I was very surprised when all four pairs from three different brands I brought into the JC Penney fitting room were wearable, including a clearance model that rang up at $3.98. That NEVER HAPPENS.

Friday, July 3, 2009

Top Thrill Dragster Video


DSCN2579
Originally uploaded by prismglass
Here's a video of the Top Thrill Dragster ride at Cedar Point. I was standing in line for the front row of the front train. You can see how long the prep time is compared to the time the train is really moving.

Thursday, July 2, 2009

Cedar Point

Our new favorite amusement park ride of all time is the Millennium Force roller coaster. We rode it five times over our two days at Cedar Point. Perfect dynamics, great views of the lake, fast line, secure hip-bar restraints, and occasional tunnels add up to a ride I always left smiling.

On our last ride of the second day, which we did on the Millennium Force towards the back of the train, I overheard a great conversation. A boy, maybe 10 years old, had dragged his mother to sit in the row in front of us. As we waited to board, she was expressing concern about being so far back - the back of the train goes over hills much faster than the front of the train, and I kind of picked up that she wasn't a fan of that. But, they stayed one row ahead of us anyway. As the train got to the very top of the first hill, I heard this:
Kid: "Can I cuss?"
His Mom: "Yes."
Kid: "sSHHIIIiiiii...."

Our second favorite ride is the Top Thrill Dragster. Due to maintenance issues closing the ride several times each day, we were only able to ride three times. Twice in the front row, once in the second row, so I had a good view of the track in front of me. Well, at least until my vision blurred from the extreme launch speed. Dragster is all speed and height, over so fast you don't feel like you even blinked, but etched into memory like it happened in slow motion. Highly recommended.

And, for all of you readers who "grew up near Cedar Point" and "went there all the time growing up" know that I am extremely jealous. We WILL be back, oh yes, we will.

Me

Me
There aren't many photos of the photographer

Twitter

Search This Blog

Flickr Badge

www.flickr.com
This is a Flickr badge showing public photos and videos from prismglass. Make your own badge here.

Labels